![Gabster](/img/default-banner.jpg)
- 125
- 2 191 904
Gabster
Canada
Приєднався 12 сер 2014
Reviews and diy of high end Hifi audio systems and other things that interest me.
My approach is to build the best audio equipment I can using very advanced an innovative techniques.
I also review other non diy audio equipment.
My approach is to build the best audio equipment I can using very advanced an innovative techniques.
I also review other non diy audio equipment.
Gabster TD1 Dac Configuration and DC Offset. Sim, Reg, Balanced mode.
In This Video we Configure The TDA1541A Gabster TD1Dac to work in Sim, Reg, and Balanced mode and how to operate in Single-Ended, and Balanced modes. We'll explore the functions of each jumper and guide you through powering the DAC using different power supply options.
Support me by joining my Patreon : www.patreon.com/user?u=86208088
What is the Gabster TD1 Dac ? ua-cam.com/video/y3MB5W970Ow/v-deo.htmlsi=Ln96sB0OXSHjHjjv
Where can I buy the Gabster TD1 Dac Kit? gabster.ca/Gabster-TD1/
Where Can I buy IanCanada parts? iancanada.ca/
Also see links below for all the parts you need.
Where can I get support with IanCanada parts? See the manuals, Post on the forum below or contact Ian.
www.diyaudio.com/community/threads/asynchronous-i2s-fifo-project-an-ultimate-weapon-to-fight-the-jitter.192465/page-644
Where Can I get support for the Gabster TD1 dac ? Checkout all the videos under the Gabster TD1 Dac Playlist, and Check out Gabster TD1 on Gabster.ca
** Parts you will need to build The Gabster TD1 Dac **
Some parts are affiliated Links
Silver plated OFC Wires: ebay.us/LC38RJ
12 X 10cm UFL connector wires s.click.aliexpress.com/e/_DCLpe19
Or 12 X 10cm long x 10: amzn.to/46hhKhd
Mouser Parts link comes with the Gabster TD1 Board
RCA Connectors : s.click.aliexpress.com/e/_DBxvnIB
Jumpers and Caps need amzn.to/4fmP7TW
Standoffs: amzn.to/3Wi5DvF
** Tools and Supplies you may need **
My Favorite True RMS Tester amzn.to/4curW7C
Cheap but great magnifier amzn.to/3Aj7uZL
Great soldering and de-soldering kit for cheap amzn.to/4dzwJFw.
Screw Driver set amzn.to/3WRkcGI
** Parts to Build the IanCanada Streamer and Pcm converter **
PurePi iancanada.ca/products/48b-purepi-ii-5v-3-3v-ultracapacitor-lifepo4-battery-power-supply-combo-with-ultracapacitors-battery-holders-pre-installed-86-00
FifoQ7 iancanada.ca/products/1d-fifopi-q7-flagship-i2s-dsd-dop-fifo-with-isolator-re-clocker-and-low-phase-noise-xos
ShielPi pro iancanada.ca/products/shieldpi-pro-multi-functional-emi-shield-power-filter
I2s to Pcm converter board: iancanada.ca/products/9-i2s-to-pcm-converter-board-v2-0?_pos=1&_psq=pcm&_ss=e&_v=1.0
Raspberry-Pi amzn.to/3WWcKue
or Input Receiver-Pi DDC iancanada.ca/products/19d-receiverpi-ddc
Amanero Board iancanada.ca/products/original-amanero-combo384-usb-digital-interface-newest-version
Monitor Pi Pro iancanada.ca/products/49b-monitorpi-pro-integrated-control-center-and-signal-analyzer
Spike Feet iancanada.ca/products/22b-high-quality-spike-feet-kit-lot-of-4
** Software **
Roon/Ropieee
ua-cam.com/video/-vzJR9HWwiY/v-deo.htmlsi=-sDjJOFYb1utIsws
If you need to build a Roon music server here is a Video how to put one together ua-cam.com/video/djzWU_gA07M/v-deo.htmlsi=LKBFPvAcb9bxHo_o
For Moode, Volumio, JRiver, Picore, and many others see the respective online tutorials
** Power supplies Options **
Simple
3X IFI 5v : amzn.to/3zPsya1
1X IFI 15v : amzn.to/3ABmyly
Simple with UcConditioners
3X IFI 5v : amzn.to/3zPsya1
1X IFI 15v : amzn.to/3ABmyly
2X 5V UCConditioner iancanada.ca/products/ucconditionermkii-5v-or-3-3v
Linear Option
Dual Linear Pi iancanada.ca/products/linearpi-mkii-ultra-low-noise-smt-linear-power-supply?variant=47554120253740
2X 5V UCConditioner iancanada.ca/products/ucconditionermkii-5v-or-3-3v
15V 25W Linear PSU s.click.aliexpress.com/e/_DBcB1a3
Advanced Ultra Capacitor Option See Videos below and Danger warnings
15V UCpure: ua-cam.com/video/uawrzoRIwxA/v-deo.htmlsi=luID_hQbi9O-Vstq
+5v ,0 -5v UcPure : ua-cam.com/video/USW6VpZ_oC0/v-deo.htmlsi=42PmEitQLggS2rdh
Please note I am not Affiliated with Mouser, IanCanada or Roon
Support me by joining my Patreon : www.patreon.com/user?u=86208088
What is the Gabster TD1 Dac ? ua-cam.com/video/y3MB5W970Ow/v-deo.htmlsi=Ln96sB0OXSHjHjjv
Where can I buy the Gabster TD1 Dac Kit? gabster.ca/Gabster-TD1/
Where Can I buy IanCanada parts? iancanada.ca/
Also see links below for all the parts you need.
Where can I get support with IanCanada parts? See the manuals, Post on the forum below or contact Ian.
www.diyaudio.com/community/threads/asynchronous-i2s-fifo-project-an-ultimate-weapon-to-fight-the-jitter.192465/page-644
Where Can I get support for the Gabster TD1 dac ? Checkout all the videos under the Gabster TD1 Dac Playlist, and Check out Gabster TD1 on Gabster.ca
** Parts you will need to build The Gabster TD1 Dac **
Some parts are affiliated Links
Silver plated OFC Wires: ebay.us/LC38RJ
12 X 10cm UFL connector wires s.click.aliexpress.com/e/_DCLpe19
Or 12 X 10cm long x 10: amzn.to/46hhKhd
Mouser Parts link comes with the Gabster TD1 Board
RCA Connectors : s.click.aliexpress.com/e/_DBxvnIB
Jumpers and Caps need amzn.to/4fmP7TW
Standoffs: amzn.to/3Wi5DvF
** Tools and Supplies you may need **
My Favorite True RMS Tester amzn.to/4curW7C
Cheap but great magnifier amzn.to/3Aj7uZL
Great soldering and de-soldering kit for cheap amzn.to/4dzwJFw.
Screw Driver set amzn.to/3WRkcGI
** Parts to Build the IanCanada Streamer and Pcm converter **
PurePi iancanada.ca/products/48b-purepi-ii-5v-3-3v-ultracapacitor-lifepo4-battery-power-supply-combo-with-ultracapacitors-battery-holders-pre-installed-86-00
FifoQ7 iancanada.ca/products/1d-fifopi-q7-flagship-i2s-dsd-dop-fifo-with-isolator-re-clocker-and-low-phase-noise-xos
ShielPi pro iancanada.ca/products/shieldpi-pro-multi-functional-emi-shield-power-filter
I2s to Pcm converter board: iancanada.ca/products/9-i2s-to-pcm-converter-board-v2-0?_pos=1&_psq=pcm&_ss=e&_v=1.0
Raspberry-Pi amzn.to/3WWcKue
or Input Receiver-Pi DDC iancanada.ca/products/19d-receiverpi-ddc
Amanero Board iancanada.ca/products/original-amanero-combo384-usb-digital-interface-newest-version
Monitor Pi Pro iancanada.ca/products/49b-monitorpi-pro-integrated-control-center-and-signal-analyzer
Spike Feet iancanada.ca/products/22b-high-quality-spike-feet-kit-lot-of-4
** Software **
Roon/Ropieee
ua-cam.com/video/-vzJR9HWwiY/v-deo.htmlsi=-sDjJOFYb1utIsws
If you need to build a Roon music server here is a Video how to put one together ua-cam.com/video/djzWU_gA07M/v-deo.htmlsi=LKBFPvAcb9bxHo_o
For Moode, Volumio, JRiver, Picore, and many others see the respective online tutorials
** Power supplies Options **
Simple
3X IFI 5v : amzn.to/3zPsya1
1X IFI 15v : amzn.to/3ABmyly
Simple with UcConditioners
3X IFI 5v : amzn.to/3zPsya1
1X IFI 15v : amzn.to/3ABmyly
2X 5V UCConditioner iancanada.ca/products/ucconditionermkii-5v-or-3-3v
Linear Option
Dual Linear Pi iancanada.ca/products/linearpi-mkii-ultra-low-noise-smt-linear-power-supply?variant=47554120253740
2X 5V UCConditioner iancanada.ca/products/ucconditionermkii-5v-or-3-3v
15V 25W Linear PSU s.click.aliexpress.com/e/_DBcB1a3
Advanced Ultra Capacitor Option See Videos below and Danger warnings
15V UCpure: ua-cam.com/video/uawrzoRIwxA/v-deo.htmlsi=luID_hQbi9O-Vstq
+5v ,0 -5v UcPure : ua-cam.com/video/USW6VpZ_oC0/v-deo.htmlsi=42PmEitQLggS2rdh
Please note I am not Affiliated with Mouser, IanCanada or Roon
Переглядів: 615
Відео
Before Powering your Gabster TD1 Dac
Переглядів 94223 години тому
These are Steps you need to do Prior During and after you power the Gabster TD1 and The IanCanada Streamer. Please observe all safety standards while working on DIY projects.
Canon R5II: Must-Know Features - Pre-Continuous Shooting & Electronic Shutter Explained
Переглядів 1,9 тис.День тому
Discover the game-changing features Pre-Continuous ( Pre-Shooting) (Pre-Roll) of the Canon R5II that you need to know about! In this video, we dive into the innovative Pre-continuous shooting mode and the electronic shutter, two features that are often overlooked but can make a big difference in your photography. Learn how these tools can help you capture the perfect shot every time. Whether yo...
How To solder small Components on DIY PCB
Переглядів 866День тому
In this video, I'll show you step-by-step how to solder small components on a DIY PCB. Whether you're a beginner or an experienced DIYer, you'll learn essential tips and techniques for achieving clean, reliable solder joints on even the smallest components. From selecting the right tools to mastering the proper soldering techniques, this guide will help you enhance your PCB projects. Support me...
How to Assemble the GOTRAX CTI3 Electric Bike
Переглядів 270День тому
Step by Step GoTrax CTI3 E-bike assembly Video GoTrax Brand’s website: bit.ly/4crXMTa Discount code: Gabster100(save $100CAD)
Flagship IanCanada Streamer & Gabster TD1 Dac. Step by step build.
Переглядів 1,8 тис.День тому
Build the best streamer for the Gabster TD1 Dac by IanCanada This is a Step by Step build of the streamer portion. For the Gabster TD1 step by step build Video see ua-cam.com/video/wtbM0cdyd8I/v-deo.html also check out all the videos in the Gabster TD1 playlist What is the Gabster TD1 Dac ? ua-cam.com/video/y3MB5W970Ow/v-deo.htmlsi=Ln96sB0OXSHjHjjv Where can I buy the Gabster TD1 Dac Kit? gabst...
Gabster TD1 Dac How you can build it step by step
Переглядів 2,1 тис.День тому
This is a Step by Step build of the Gabster TD1 Dac with IanCanada Streamer Streamer Video will be ready tomorrow. What is the Gabster TD1 Dac ? ua-cam.com/video/y3MB5W970Ow/v-deo.htmlsi=Ln96sB0OXSHjHjjv Where can I buy the Gabster TD1 Dac Kit? gabster.ca/Gabster-TD1/ Where Can I buy IanCanada parts? iancanada.ca/ Also see links below for all the parts you need. Where can I get support with Ian...
Gabster TD1 build
Переглядів 4,1 тис.14 днів тому
All info you need to build The TD1 Dac. Very Important Info at the beginning DO NOT Build without watching the beginning of this Video. For configuration see the upcoming configuration Video For any questions or if you need help please post here and lets all help each other I will try to help a bit as much as I can. What is the Gabster TD1 Dac ? ua-cam.com/video/y3MB5W970Ow/v-deo.htmlsi=Ln96sB0...
GoTrax CTI 3 E-Bike Must-Have Features You Need to Look For!
Переглядів 45414 днів тому
In this video, I'll take you through the features of my GoTrax CTI 3 e-bike that make it an excellent choice . Join me as I highlight what to look for in a mid price e-bike and why the GoTrax stands out. GoTrax Brand’s website: bit.ly/4crXMTa Discount code: Gabster100(save $100CAD)
JLCPCB, Easyeda 5 tips for better PCB design
Переглядів 95328 днів тому
JLCPCB 6-layer PCB coupon Free Via-in -pad. Get $60 new user coupons jlcpcb.com/?from=gabster In this video, we'll share 5 essential tips to help you improve your PCB design with JLCPCB. From optimizing your layout to verifying your design, these tips will ensure you achieve the best results for your projects.
Gabster TD1 Dac Features and Tips. Part 2
Переглядів 2,5 тис.Місяць тому
The Gabster TD1 merges vintage audio heritage with modern design, centered around the Philips TDA1541A DAC chip. It supports direct I2S signals and can operate in normal, simultaneous, or balanced differential modes with a PCM I2S board, offering exceptional flexibility. The design is modification-friendly, allowing you to tailor the DAC to your specific preferences. Featuring a 4-layer, gold-p...
Gabster TD1 Dac Features and Tips. Part 1
Переглядів 3,5 тис.Місяць тому
The Gabster TD1 combines vintage audio heritage with modern design, built around the TDA1541A DAC chip by Philips. It accepts direct I2S signals and can operate in normal, simultaneous, or balanced differential modes with a PCM I2S board, offering great flexibility. The design allows for easy integration of modifications, enabling you to tailor the DAC to your specific preferences. Featuring a ...
Turntable and Speakers Angels Horn
Переглядів 1,1 тис.Місяць тому
Angels Horn HP-H00501 Bluetooth Turnable and Speakers are great Value for the price Ideal. a great option for people looking to get into record collecting without spending a lot of money for a quality turntable. US Amazon link: amzn.to/3Yisry8 CA amazon link: amzn.to/3WglvyI UK Amazon link: amzn.to/3Lz9Ypg Use code ''Angels'' if buying from the Official website link: bit.ly/4czxqPC
Gabster TD1 Dac My Favorite of all times
Переглядів 27 тис.Місяць тому
Available on Gabster.ca The Gabster TD1 DAC is engineered to deliver amazing sound quality with a huge soundstage, exceptional upper and lower frequencies, and a highly musical presentation. Designed for true audiophiles, the TD1 ensures you will love listening to your favorite music for hours on end. Gabster TD1 available at: gabster.ca/Gabster-TD1/ Build Videos and more see Gabster TD1 Playli...
How the Stack Audio Auva 100 Speaker Isolators changed my view.
Переглядів 4,3 тис.Місяць тому
How the Stack Audio Auva 100 Speaker Isolators changed my view.
Amplifier Speaker Selector NeoHipo ET30
Переглядів 1,6 тис.Місяць тому
Amplifier Speaker Selector NeoHipo ET30
Fujifilm GFX 100S II Camera. Live review with the Model: Lemon
Переглядів 1,4 тис.2 місяці тому
Fujifilm GFX 100S II Camera. Live review with the Model: Lemon
Denafrips Ares upgrade by Ian Canada
Переглядів 8 тис.2 місяці тому
Denafrips Ares upgrade by Ian Canada
Free Upgrade to your HIFI Stereo, with 20 quality recorded songs.
Переглядів 6 тис.2 місяці тому
Free Upgrade to your HIFI Stereo, with 20 quality recorded songs.
Protodac sound Comparison and how to add a Fifo Q7 / PurePi from IanCanada
Переглядів 5 тис.4 місяці тому
Protodac sound Comparison and how to add a Fifo Q7 / PurePi from IanCanada
Ultra / SuperCapacitors Power supply with Triggers and timer. Step by step
Переглядів 2,8 тис.4 місяці тому
Ultra / SuperCapacitors Power supply with Triggers and timer. Step by step
Michel's Dac Streamer. Subscriber DIY build
Переглядів 4,5 тис.4 місяці тому
Michel's Dac Streamer. Subscriber DIY build
Best power supply for clocks and DACs to improve the sound quality.
Переглядів 4,4 тис.4 місяці тому
Best power supply for clocks and DACs to improve the sound quality.
Best Linear Power Supply by IanCanada
Переглядів 15 тис.4 місяці тому
Best Linear Power Supply by IanCanada
Pure 15v Power. Mini setup using UCPure by IanCanada
Переглядів 4,1 тис.5 місяців тому
Pure 15v Power. Mini setup using UCPure by IanCanada
Alternatives to very large ultracapacitors. And how they work
Переглядів 3,6 тис.5 місяців тому
Alternatives to very large ultracapacitors. And how they work
World's Best Power Supply UcPure by Ian Canada +5v 0 -5V Detailed Build
Переглядів 21 тис.5 місяців тому
World's Best Power Supply UcPure by Ian Canada 5v 0 -5V Detailed Build
I would warn everyone building this, TO CHECK YOUR RESISTORS. They are small, and hard to read but after I built my TD1 I found that Mouser had mistakenly sent me 3 220 ohm resistors and 1 1.18kohms resistor. They are easy to double check with an OHM METER and might help you avoid catastrophe.
Thank you for mentioning this I guess they can make packaging mistakes that can be frustrating. So far I have been lucky. Checking your resistors is always a good practice I will also add to only unpack one set of resistors at a time to avoid mix-ups. Also a reminder that the 220 ohms are not used with a FIFOPi like the Q7 and do not need to install them in that case and to short the pads with Solder They are useful if you are using a I2s Signal directly from a CD player as some are too strong.
Nice work and so great to see your passion for the project. With some limited experience and recently a/b testing a Magnavox TDA1541 cd player vs a Denon cd player with a PCM1702 Burr Brown i seem to prefer the dynamics and sound of the PCM1702 but it is not hugely different. Maybe it is the implementation as usual but just wanted to mention. Best Wishes to you, Gabster and i may just try out your project too soon.
Audio technology is not built into plastic housings.
Why not...?
Thank you that is a lot of great info you have provided us with a ton of great info that should make it easy.🙂
Glad it was helpful!
Thanks, Gabster 👍
Hey gabby where did you get the cable for the j10 from the PurePi to the Q7?
I think it came with either The PurePi or the Q7 I can not remember exactly if not Ian sells some extra ones
@@Gabster1 ok thank you, would I need an additional shielding on top of the Q7 if I want to have the UcConditioner on top of the clocks like you did in a previous build?
@@njrumenos I would leave the UC conditioner beside it if you are building a TD1 or it will be way too tall or have The TD1 on the side and Uc Conditioner on top additional Shielding does not hurt but not critical
@@Gabster1 ok thank you, I’ll will order the additional shielding for on top for now and I can play around with orientation
The problem I find with it is running multiple outputs from the same source. For example I currently use PC USB and dacs running into the amps.
The shield pi doesn’t require earthing? Also can we use the isolator pi with the shield pi?
Did you have any issue with shipping through aliexspress?
Not at all but had to pay some taxes and brokerage nothing unusual for Items of this value
The Canon R5 is STILL the BEST Photography Camera GOING !
Totally agree with your test track suggestion. That whole "Illusions" album from Kalya Scintilla is fantastic. Very well engineered! May I also suggest the Danish group Bliss "Quiet Letters". Excellent soundstage as well.
What about the flammability of the tie-rips?
The ones I use link in the description have a flammability rating Heavy Duty Fire resistant 94V-2 I would avoid any that do not provide a rating. so dollar store ones are out
Jay of ‘Jays Audio lab’ also highly rates this amp, especially with the pre. One of his faves.
It is really nice I love it never tried the pre but love the combination with a tube pre
What’s going to be the best Raspberry Pi version to pair, the 3B, 4 or the new 5?
3B or 4 are more then enough
@@Gabster1thank you, I found 1600mah LifePO4 3.2V cells for the PurePi, it looks like yours are 1800mah, does this matter? Will 1600mah cells be fine?
Oh, one last thing - keep forgetting to ask, but is there any combination of boards with Ian Canada that would enable us to put DSD through the TD1 DAC, or will it only handle PCM? I appreciate that may sound like a ridiculous question for DAC Chips that ceased production back in the 1990’s, but never ceases to amaze me me what Ian Canada can make possible and so I thought I’d ask in case you already knew. Thanks
Not without conversion by then the Essence of DSD is lost I think
Interesting track suggestion - See what you mean about the frequency range and holographic sound potential; it’s full of ear candy audio teasers. Very interesting 👍 Also really useful to hear about the ability to disable the main output stage power section by removing those jumpers (if required). Will definitely follow your advice and explore the potential of the TD1 as designed before considering tinkering, including tubes and using a balanced pair of boards etc. I thought I’d heard something in one of your other videos that made me wonder if cutting off the power to the output stage might be an option that way, so thanks for clarifying. Still haven’t put in my order with Ian Canada yet, but best get my finder out. By all accounts the boards I ordered should arrive in the post tomorrow 🤞
Glad to see you researching first and watching the how to videos Some of us have a tendency to build first then read the manual and that can get you in trouble
Argh I burned Ian’s PCM converter 😢 I get about 400-600 ohms at the Gabster TD1 - do you think there is a mistake?
Probably did you also check the Ufl connectors if they are soldered properly you may have a short it may not be burnt You can also take a couple closeups front and back with a good camera and widow light And send them to me maybe I can spot something But do check all 4 UFL,s preferably without the TDA1541A in place Also when you flip the test leads on the 5v and 15v do they fluctuate usually capacitors are charging and discharging
I think setting a custom function would help then you only turn it in when you need it say shooting a sports game or a bird about to fly
Ordered it … but I was impressed with that Panasonic dynamic range 😮
The Fuji is awesome but it is a different camera
@@Gabster1 I’m canon based with r3 and 1dx and lenses.. great video well done 👏
The preshooting is great, however like everything in photography there is a trade off, one the buffer fills up fast and you will have a lot more photos to cull at the end of the day because of the 30FPS but it is better to have that option than to not have that option.
GM☕️
I had this lens, and I didn't like it. I do wildlife photography early in the morning or in the evening, and that lens isn't fast enough. I prefer a Sigma 60-600mm ef mount. Better designed, but mostly faster, and cheaper. And I think after testing both on my R5, that the Sigma is sharper.
Hi, Received the TD1 board and mouser parts. About to start the build but unsure what are the correct resistor values are? I am confused specifically with R2 and R9, R11 and R21,R13 and 23, R12 and 22. Also can you please provide instructions for adjusting zero offset? Thanks for your effort to help the diy community.
Make sure you Check your Email There should be a BOM Link at the Bottom of your email could be in the spam folder if not message me. More videos are coming including Dc Offset setting Make sure you have the BOM before Building also see the manual page on Gabster.ca
@@Gabster1 Thanks , found it in spam folder.
For once we can use that electronic shutter and the Pre Continuous shooting is a great addition
Excellent review as always, Gaby. Having pre-roll is a big deal. It has been around in the video universe for quite a while and it’s great that it’s made it into still cameras.
Thank you I think you need one to Compliment your C400
@@Gabster1 😄😄
Pre Continuous shooting Pre Roll and the fast readout Electronic Shutter are the 2 things that made me upgrade to the R5 II
Glad you found the Pre Continuous Pre roll shooting helpful you really do not want to miss that feature
Thank you for highlighting the precontinuous shooting. That is a game changer
pre continuous shooting is indeed a step towards a much better video camera
Excellent review of the Canon R5 II, it appears you are gathering quite a stable of cameras! 🙂
You may want to buy back your Canon lenses But I think you are very well setup with your Fuji, Smart choice for what you shoot.
The only solution is Sorbothan. Everything else is bullshit that simply does not work. Sorry, it's just materials physics. End of story.
Sadly the story doesn’t end Sorbothan is a great material but only covers certain frequencies for walking around and low sub 50 hz Sponges work better A combination of both with 2 levels is ideal Then we would be both happy
The IsoAcoustic Gaias from Canada do the same thing but they not so heavy , they have suckers that grip to the floor. Bass , imaging and clarity does improve quite a bit. Worth the $
Thanks Gaby for sharing this..... It is really kind of you.
Glad it was helpful and Thank you
Hi Gaby, I trief to find the CRC caps 10uf 1% 30V but no luck. Do you have a source for these? Or do you have an alternative coming close? Thank you for advice.
Not that I know. Mark gave me those a long while ago they are vintage I don’t think he has any more you can ask Mark about his new favorite
@@Gabster1 thank you for your kind replizieren, I will try Mark
Hey Gabbi,all is put together on my board, except for the resistors- unfortunately you skipped the part where what resistor belong to. It would be great to get some more details to that :) by the way I love your project
😂 I found all information in the excel sheet you provided
Good you found it I hope all the rest is in the write place and polarity Also check the Imp Read on the Manual page on my site gabster.ca/Gabster-TD1-Manual-1/
Nicely Done. Looking forward to more in this series. Hopefully you'll show how to clean up if you apply to much solder to the board by mistake as a beginner . As a newbie solderer when you showed the miss of soldering @ 8:30 into the video wasn't the pin's making a connection by just touching them. Are you worried about vibration ? Thanks
I will @ 8:30 if not soldered it would have failed
Using a hot air workstation and solder paste is much easier for those small parts
It is easier for sure but most beginners and intermediate DIY ers do not have a hot air workstation
I am glad you posted this I learned a important trick Thank you
GM☕️💊🥓 I think many will be encouraged,thanks for this video 👍
Good to hear
I had to fight with SMD in my mid 50's with a Weller TCP iron and tips that were much to big - what a PITA! Once I got some small tips it was much easier.
For sure that is half the battle
Thanks! Great lesson!
Glad you liked it!
How does it sound compared to the R-R DAC underneath, sir?
Better soundstage (Holographic) better high frequencies definition good base and overall more musical and less fatigue. The holographic soundstage is very easy to spot specifically with songs that has great soundstage recording For example listening to Zulu Voodoo by Kalia Scintilla you can easily tell the difference
Can Analog Discovery 3/Waveform and Audio Analyzer Suite run on Windows 11 ?? And thanks for a good and exciting channel 😃
Yes that is what I am using actually
Thanks a lot that helped fix my brake noise that I kept hearing
Shield pi pro mk2 or mk3?
either are good but if you are buying a new one get the III
Thanks for the Eivor tip, i like that a lot. If I can reciprocate... please listen to Moon River and love is a losing game, recorded by Eddi Reader on the Back the Dogs album. She is in my opinion, the finest female vocalist to come out of the UK in the last 50 years. I promise you wont be disappointed!
Thank you
Nice detailed build I like the detailed step by step approach
Thanks this will come in handy when I get my Bike I like the trick of putting the bike upside down and Adj the Brakes